Key Features

  • Rapid up/down mechanism
  • Hydraulic pulley Tensioning System
  • Heavy Screw for up/down
  • Revolving trolley

TRUE CUT D1/D2 MONO/SINGLE DIAMOND WIRESAW MACHINE

This machine is designed to be useful for block shaping i.e. squaring, face dressing, center cutting and variable thickness slab cutting.

The machine is mainly designed for cutting marble and granite blocks with the help of diamond wire. This wire has many beads made of sintered diamonds. To run this wire fast, four aluminum pulleys are used along with the spindle fitted in it, it provides stability to the wire by avoiding vibration and stretch. All the pulleys fitted on this machine have been duly machined to be fitted with rubber liners.

TECHNICAL SPECIFICATIONS
MODEL TRUECUT D1 TRUECUT D2
Pully Diameter 1500 mm 2000 mm
Wire quantity 1 1
Diameter of wire rope Bids 10.5 10.5
Endless or lug crimped Wire length 18.5 m 18.5 18.5


USEFUL CUTTING SIZE OF BLOCKS
MODEL TRUECUT D1 TRUECUT D2
Max Cutting Height 2200 mm/87 Inch 2200 mm/87 Inch
Max Cutting Length 3860 mm/152 Inch 3860 mm/152 Inch
Max Cutting Width 2450 mm/ 96 Inch 2450 mm/ 96 Inch


BLOCK LOADING TROLLEY DETAILS
MODEL TRUECUT D1 TRUECUT D2
Total Qty Of Trolley 1 Nos. 1 Nos.
Loading Capacity 40 tons 40 tons
Working Of Trolley Fabricated, Duel frame with bottom Traversal Geared motorized and upper with Revolving on duly fitted large DIA slewing bearing. Also an Electronic wheel encoder is providing for various thick Slab accurate sizing and cutting. Fabricated, Duel frame with bottom Traversal Geared motorized and upper with Revolving on duly fitted large DIA slewing bearing. Also an Electronic wheel encoder is providing for various thick Slab accurate sizing and cutting.
Upper Frame Motorized Revolving with Large Gear, Rack-Pinion to rotate 360°. Mechanical 4 position hold @ 90° (manual locking) Motorized Revolving with Large Gear, Rack-Pinion to rotate 360°. Mechanical 4 position hold @ 90° (manual locking)
Bottom Frame Motorized with suitable Gear-Box. It is for block setting under the edge of wire. Motorized with suitable Gear-Box. It is for block setting under the edge of wire.


MOTOR POWER
MODEL TRUECUT D1 TRUECUT D2
Main Spindle 15 Kw/20 Hp. (Powered by VFD) 15 Kw/20 Hp. (Powered by VFD)
Frame Up/Down (Rapid & feed) 7 Nm (Servo motor Powered by VFD). 7 Nm (Servo motor Powered by VFD).
Power Pack of wire tensioning unit 0.75 kw /1 Hp. 0.75 kw /1 Hp.
Trolley revolving unit 1.5 Kw / 2 Hp. 1.5 Kw / 2 Hp.
Water Consumption 500 Liter/min 500 Liter/min
Gross Weight Approx. 5.5 Tons Approx. 5.5 Tons


For detailed technicial specifications : DOWNLOAD PRODUCT CATALOGUE
LIKE US